Energy Conservation Systems Belfast & Northern Ireland
BSH Limited designs energy conservation systems combining heat recovery, CHP, absorption chilling and controls within pre-packaged plantrooms to reduce a building's overall energy use.
Energy Conservation Systems Belfast reflects BSH Limited's commitment to energy efficiency and helping reduce carbon emissions through promoting the use of future fuels including hydrogen. BSH can design combination fuelled systems that include heating, cooling, combined heat and power, domestic and control systems, with energy conservation a central element.
Energy conservation at building-services level means capturing and reusing heat that would otherwise be wasted, coordinating heating and cooling so they do not work against each other, and controlling the whole system to match the building's actual loads rather than running continuously at full output.
Energy conservation systems are often delivered through BSH's pre-packaged energy plantrooms — a plug-and-power solution for essential building services — assembled off-site in a controlled environment for rapid on-site connection and commissioning.
Heat recovery and CHP
Combined heat and power captures the heat that would otherwise be wasted during electricity generation and puts it to use for space heating, domestic hot water or process loads. Where cooling is also required, the same captured heat can drive Yazaki absorption chilling to produce cooling, improving overall efficiency and reducing energy use compared with generating heat and cooling separately.
Coordinated heating and cooling
A building's heating and cooling systems can work against each other if installed in isolation. BSH can design combination fuelled systems that include heating, cooling, combined heat and power, domestic and control systems, so the services coordinate through shared controls rather than competing, conserving energy across the building.
Controls matched to the building
Energy conservation depends on controls that match output to the building's actual loads — building size, insulation, ventilation, intended temperatures and air-change requirements. Specifying a system to the actual load, rather than oversizing, avoids the wasted energy that comes from a system running continuously at full output.
Commercial applications
Where this service applies
- Buildings seeking to reduce overall energy use from heating and cooling
- Sites with simultaneous heat, power and cooling demands
- Premises recovering waste heat from generation or processes
- Organisations coordinating heating and cooling through shared controls
Benefits & considerations
What to consider
- CHP capturing waste heat to improve overall efficiency
- Absorption chilling using recovered heat for low-carbon cooling
- Coordinated heating and cooling through shared controls
- Pre-packaged plantroom delivery for rapid installation
- Over 50 years of engineering expertise across three generations
Problem · Reaction · Solution
How BSH can help
Problem
Buildings waste energy when heating and cooling run independently, waste heat is vented rather than recovered, and controls do not match the building's actual loads. Installing heating, cooling and power in isolation means the systems can work against each other and the building uses more energy than it needs to.
Reaction
Higher energy use means higher running costs and higher carbon emissions, and the building-services systems may conflict rather than coordinate. Facilities managers and consultants need a specialist who can design an energy conservation system that captures waste heat and coordinates the building's services.
Solution
BSH designs energy conservation systems combining CHP, heat recovery, absorption chilling and controls within pre-packaged plantrooms. Because the right system depends on your building's loads and goals, the next step is to discuss your requirements with BSH's engineers. Contact BSH to discuss your energy conservation systems project.
Questions & answers
Common commercial questions
Discuss your energy conservation systems project
Talk to BSH about reducing your building's energy use — CHP, heat recovery, absorption chilling and controls integrated within a packaged plantroom.
Contact us